Fit and finish put a large portion of 1911 clones to shame. The trigger is relatively short and light for a factory gun. All are relatively tight out of the box. When I got the gun, I cleaned the goop off of it. Instead, I believe it to be more about the mag. One more thing, ya, you might try decent mags like McCormick, Wilson Combat mags. At one point, I didn't think I'd get the new sight in, it wouldn't budge, couldn't take it out, past the point of no return.
Lots of people happy with fit and finish, but some reports of quality control issues and consistent reports of terrible customer service when issues do pop up. . I tried different magazines and ammunition. Thanks again for your good work. I have no data or long term experience with this part yet, so I don't want to see anyone feel they ordered a part, and got hosed.
They have dovetails for the sights that are made by no one. I blame those 3 misses on the my aging eye sight. Nobody wants to buy a dud, it takes all of the good expectations you were anticipating when buying it and leaves you with a lousy feeling. They said that sometimes, rust or Loktite can cement sights into the dovetail. Therefore, you eliminate the barrel bushing, yielding a coned barrel that fits directly into the slide. If there's a down side, it's that I can't take the recoil spring out! These are fine looking weapons and it would be a shame if the metal were as weak as the original Spanish Llamas were.
All I wanted was a 1911 that would be reliable and combat accurate. I also changed out those strange grips. With 230-grain ball, the traditional bullseye hold produced center hits. This is a mixed blessing, since the weight of an all-steel 1911 with a load of 12 rounds of. Right, I did use pliers to remove the bushing from the screw when it came off the frame when I was replacing my grips. Has a couple flimsy looking parts mainly the recoil spring assembly.
The magazines are junk and cannot be loaded with more than 4-5 rds. So far no problems with the guide rod or recoil spring, but I have thought of replacing it. The replacement I got from Colt was closed on both ends. Unlike many pistols on the market today, the barrel is not chrome lined. The defender recoil springs while stiffer than stock will not allow full compression.
And I shot at least 500rds 185gr. Shooters looking to add upgraded sights, safeties, and triggers are likely to find that other 1911s make better starting points. Did have 2 stove pipe, 1 failure. He could not understand the mags are a separate part of the gun. I put it through its paces at the range, simgle shots, double and triple taps.
While I prefer a Commander length 1911. The solution to those are to trash the mag. I like the fact that it shoots better than my glock and Taurus. When I buy this stainless version Titan, I will never buy another gun in my life, I have what I want, and need! We'll see how things go next time. This is evident right from the outset; the Fatboy did not arrive in a blow-molded plastic case, it came in a cardboard box with a cable lock and one magazine. I did replace the trigger my deal i put a short with overtravel adj from midway.
Buying a Firearm Online is Easy! In order to unlock the chamber and retrieve the next round, the chamber end of the barrel tilts downward forcing the muzzle end to tilt upwards. So someone can come along, clear your jammed 1911 and drill you with it? Bought the cheapest ammo the store had on sale. The height difference is even more evident when the Fatboy magazine is compared to a P12 magazine below : 45 magazine on left In a very interesting departure from other 1911-style pistols, the Fatboy does not use removable grip panels stocks. Did a lot of quick combat shooting and could not be happier with the gun performance. Hopefully the metallurgy is up to snuff. I emailed Novak but they said their sights wont fit it and they would need to do custom milling if I wanted Novak. One thing I noticed though, the Colt outer-recoil spring is heavier than the stock one for the Titan.